The distribution cabinet is an essential control system for the non burning brick machine. Whether it is loading, laying, discharging, or stacking, it is controlled by the distribution cabinet. As an important component of the electronic control system, the distribution cabinet contains a large number of electronic components, and the operation is also complex and diverse. If the user of the brick free machine uses it improperly during the operation process, it may cause malfunctions and delay the production plan. Today, we will introduce the maintenance and upkeep methods of the distribution cabinet to help you better use the non burning brick machine.
1. Firstly, before using the non burning brick machine equipment each time, check if the power supply is connected in a normal state. The power supply should be a 380V three-phase four wire AC power supply. Then, close the circuit breaker of the electrical control cabinet, and observe whether the voltage displayed on each voltage is normal. Also, check if the PLC, text display, and limit switch are damaged or loose.
2. Secondly, during production, be careful not to use debugging mode.
3. Another thing is that we need to use clean bare fingers without gloves to click on the display of the text, and we cannot use hard objects to scratch or tap the screen of the instrument.
4. If encountering thunderstorm weather, it is necessary to immediately stop the production of the non burning brick machine equipment and then turn off all power sources. And the electrical control box should be well grounded at this time.
The above are the precautions for using a non burning brick machine. Have you learned them?
Fujian New Oriental Machinery Co., Ltd. Address: No. 98, Linan Industrial Park, Xianyou, Fujian Province Sales Department: 0594-8185588 After sales department: 0594-8186888
Hong Kong Oriental Machinery (International) Limited: Address: Room 2, 9th Floor, Commercial Centre, 1 Mong Kok Road, Kowloon, Hong Kong Hong Kong phone number: 14714336258
CN
EN
